Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Older incandescent lights just can’t match the performance of LEDs, and this 2" round Miro-Flex light shows why. It uses 9 diodes behind a red lens to deliver bright, even output while drawing only 0.047 amps at 12.8V. The faceted Miro-Flex reflector boosts the light’s visibility and gives it a clean, modern look. With LEDs that last about 50 times longer than standard bulbs, you can forget about filament failures and frequent replacements.
Moisture and corrosion are no match for this light. The housing and acrylic lens are sonically sealed into a single waterproof unit, so water can’t seep in and damage the circuit board or LEDs. That makes it ideal for trailers that see rain, road spray, or even full submersion at the launch ramp. Once it’s installed, you can trust it to stay dry inside and keep shining.
Visibility from the right angles keeps you safe on the road. This P2-rated light produces a 45-degree beam to either side of its centerline—90 degrees total. That focused pattern is perfect when you need a dedicated clearance or side marker light that’s easy to see straight on but not blinding from every direction. The setup meets DOT requirements so your trailer stays compliant and visible.
Installation doesn’t get much easier. The light fits into a recessed grommet mount (A54GB sold separately) that secures it neatly in place. It accepts an industry-standard 2-prong plug, so wiring is straightforward with no splicing or special adapters needed. The full setup only needs about 2 inches of space behind the mounting surface, giving you flexibility in tight spots without sacrificing reliability.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Worked as expected. Not only brighter than the original incandescent lights but the Optronics Miro-Flex product looks great even when not lit.
These lights work great. Much brighter than the stock incandescent lights that I replaced.
Ordered a replacement and spares just in case. Had 1 lose a couple leds but it was still working and bright. Overall still happy and no issues with the other 8 red ones on my trailer.
Light is nice - Wasn't aware it was going to arrive WITHOUT the plug. Guess the project is on hold and I will be paying shipping costs again. Website should state this.
Worked perfectly
I put these puppies on my 2006 Blizzard snowmobile trailer, very bright and the 2 in grommets work great. Use some WD40 on the grommet so much easier to get in.
exact replacement for gooseneck trailer.
thank you
nice looking product to dress up my 10 year old equipment trailer, these helped make it look more modern and the led lights rarely don't work.
My trailer is loaded with Optronics lighting, there waterproof and bright and easy to mount with the installation rings, best on the market!
I wanted to replace all the lights on my trailer to LED, found what I wanted and price and quick shipping made the purchase great.
Changed my equipment trailer lights over to LED. I was able to get everything I needed plus quick shipping.
Outstanding! I didn't use the product for it's intended purpose, but rather as a "third eye" stop light for my Jeep. Works perfect! Just what I wanted. I'm very glad I stepped up and purchased the pigtail and grommet. Without these two extra items, my project would have failed.
Product was as described. I chose this product because of its ease of use and brightness when on. I consider the light upgrade a safety feature for my trailer. No more “ filament flickering” from rough road.
I just installed 5 of these on my car trailer, replacing older incandescent lights. These are so much brighter! Great fit, easy to install. I haven’t had a chance to get them wet yet, but I’m sure they will hold up.
Replaced old side marker lights on trailer really makes a difference in looks and bright light.
I ordered a 2" LED clearance light for my 5th wheel because I could not find a suitable replacement locally. The service was excellent and the product better quality than the original. etrailer.com will be the first place I go in the future!
I rated "good" only because of my application.
I had 6 of these on back of my 1 ton flatbed 3 high and 3 low and for what I needed they where too bright. Working around the truck at night was blinding.
They certainly would make a trailer visible.
I went with the 4 Diode and they were PERFECT..
A very nice light its bright and easy to install. Working with etrailer.com also has been great.
I bought a set last year form another distributor and were to be watertight. The ones I bought from etrailer states waterproof and they are going on a boat trailer. We will see how well they work once I launch the boat and see if any water penetrated the inside of the light.
I will be using thiese products on a trailer I am refurbishing to pull behind my trike. The only drawback I have noticed is that I wish the black grommets came with a touch a chrome, to dress up the application.
Dustin S.
10/16/2014
Hello Ken - we do have a 2 round chrome trim ring for the grommet mount lights. The part is A55CB, and they would look great being pulled behind your trike!
Rachael H.
10/20/2014
Look great over factory bulbs. Led is the way to go.
Perfect replacement and still working
I like it better the cone style it replaced, better visibility.
Lights are brigh LED are more visible than the incandescent lights.
Extra bright and exact fit.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Don J.
3/7/2018
After a year the lights are still looking and working great.